The DynaDome pool enclosures are made of a series of rigid frames (6’ centers) that are inserted into two parallel tracks that are anchored to the pool deck. Frames move mechanically by pulling or pushing along the tracks. The enclosure telescopes 1/2, 1/3 or 1/4 of its extended length. Using a floating wheel system, the enclosure can be mounted on a non-level deck as long as the maximum displacement between 6’ distances is no more than 1/2”.
Each gable end has stationary panels above the header and a series of 3’0” x 6’4” or (6’8”) bi-fold panels below the header. When folded, the panels are secured to the column, making the unit free to move. Once opened, they are secured to the deck with locking pins.

DESIGN LOADING
Appropriate rigid frame type will be selected for the specific design load requirements. The DynaDome is designed to meet IBC 2003 design loading requirements for your area. Every DynaDome enclosure is designed for your local requirements by our engineers. You will receive stamped engineering plans that guarantee the structural adequacy of the DynaDome at your location.